| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 28 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 23 |
| Steering headbearing has excessive free play |2.2.2| | 18 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 17 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 14 |
| Registration plate issues | 14 |
| Registration plate lamp issues | 9 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 8 |
| Stop lamp remains on when the brakes are released | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 7 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 5 |
| Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Horn not working |1.7.3a| | 4 |
| Exhaust excessively deteriorated |7.1.1a| | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 4 |
| Front Brake excessively binding |1.2.1 |f|| | 3 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Position lamp not working |4.2.1 |a|| | 3 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Throttle operating incorrectly tick over speed keeps changing.revs do not drop as quickly as they should. |6.2.1f| | 2 |
| Riders seat insecure catch does not work. |6.2.1a| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 2 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Horn sound not in accordance with requirements (7.7 (c)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Exhaust mounting missing bolts |7.1.1c| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp insecure panel loose |4.1.1 |c|| | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Brake lever attachment screws missing |3.1.2b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Stop lamp remains on when the brake is released both |1.3.1e| | 1 |
| Rear position lamp adversely affected by the operation of another lamp both |1.1.3b| | 1 |
| Front position lamp does not illuminate immediately when switched on both |1.1.3a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort No rear brake |3.3.A1c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded rear brake arm lever |3.2.A1h| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies from rear brake |1.3.1a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear All position lamps do not illuminate immediately when switched on rear lamp only |1.1.3a| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Throttle operating incorrectly sticking on nearside full lock |6.2.7 |a| |i|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Lower Fork yoke deformed |2.1.1b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride side stand |6.2.1h| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Footrest insecure Footboard which is also the battery cover is insecure. |6.2.1a| | 1 |
| Throttle operating incorrectly Very stiff |6.2.1f| | 1 |
| Handlebar mounting clamp loose Handle bars loose. |2.1.1a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Roller brake test indicates a sticking brake REAR |3.3.A1a| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Front Direction indicator lens defective such that the emitted light is adversely affected bulb holder loose |4.4.1 |b| |ii|| | 1 |
| Central Rear Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake hose damaged | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Steering movement excessively rough with the wheel raised steering makes a loud noise when turning from lock to lock. |2.2.1b| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Offside Front Steering lock stop missing |2.1.3| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Throttle operating incorrectly sticking |6.2.1f| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front Brake component insecure rear brake control , securing bolt loose |1.1.21 |c|| | 1 |
| Rear position lamp incorrect colour number plate lens missing showing white light to rear |1.1.2b| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Position lamp not working both |4.2.1 |a|| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Stop lamp not working not working from rear brake lever |4.3.1 |a| |ii|| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Upper Front suspension assembly excessive wear or free play in a front suspension component head bearings |2.3.4| | 1 |
| Front position lamp incorrect colour Blue |1.1.2a| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Handlebar mounting so insecure that steering is adversely affected |2.2.1 |a| |ii|| | 1 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on Not illuminating |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on Not illuminating. |1.1.3a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies Brake light not illuminating when rear brake is applied. |1.3.1a| | 1 |
| Centre Front Riders seat insecure |6.2.1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Inner Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Riders seat insecure will not lock down |6.2.1a| | 1 |
| Offside Front Brake lever insecure |3.1.2a| | 1 |
| Offside Rear Direction indicator incorrect colour should be amber |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake lever attachment screws loose |3.1.2b| | 1 |
| Throttle operating incorrectly Revs are high |6.2.1f| | 1 |
| Rear Rear suspension bush has excessive free play Swingarm has excessive plat |2.4.A2a|i|| | 1 |
| Nearside Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear reflector on motorcycle missing + reg lamp missing |1.4.1| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded cable |3.2.A1h| | 1 |
| Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Centre Front Headlamp switch faulty |1.2.4| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticking and not returning to idle position |6.2.7 |a| |ii|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
| Central Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Brake lever pivot excessively worn both levers (1.1.1 (b)) | 1 |
| Rear Wheel bearing has excessive play not checked due to brake bind (5.1.3 (a) (i)) | 1 |
| Front Position lamp not working side lights (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Wheel corroded to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii)) | 1 |
| Headlamp not working on main beam working intermittently (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected missing (4.4.1 (b) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust silencer likely to become detached Cable zip ties are not edequate fasteners (8.1.1 (b) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Rear wheel insecure (4.2.3b) | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp High/Low selection not reliable (1.2.2b(i)) | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear Brake (L/H) (1.3.1a) | 1 |
| Nearside Front Direction indicator insecure (1.5.3b) | 1 |
| Steering headbearing has excessive free play (2.2.2) | 1 |
| Horn not working (1.7.3a) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Nearside Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Nearside Rear Brake lever excessively worn rear brake lever worn out at pivot (1.1.15 (b)) | 1 |
| Central Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| All direction indicators not working both right side not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Steering headbearing excessively stiff or notchy road tested affects steering (2.2.2 (f) (i)) | 1 |
| Central Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Offside Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Direction indicator not working right hand side (4.4.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |