Most common failures | No# failures |
---|
Rear Brake lever has inadequate reserve travel |3.1.3b| | 26 |
Headlamp aim out of alignment | 23 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Exhaust is leaking and excessively noisey |7.1.1b| | 16 |
Registration plate issues | 12 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 5 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front Motorcycle structure excessively damaged |6.1.1a| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Horn control defective |1.7.2a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust has part of the system missing |7.1.1a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Brake cylinder insecurely mounted BOLT MISSING |3.2.B1a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Brake lever has insufficient reserve travel Rear brake leaver touches handlebar (1.1.2 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Front Plate brake test indicates a severely juddering brake |3.3.B1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Brake lever excessively damaged |3.2.A1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Brake lever cannot be released smoothly |3.1.3d| | 1 |
Nearside Inner Rear Direction indicators not working |1.5.1c| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Outer Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Outer Front Upper Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Central Front Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Exhaust is leaking and excessively noisey holed |7.1.1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Horn not working |1.7.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Direction indicator missing no indicators fitted to bike (4.4.1 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |