Most common failures | No# failures |
---|
Headlamp aim out of alignment | 49 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 41 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 32 |
Exhaust is leaking and excessively noisey |7.1.1b| | 28 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 24 |
Registration plate issues | 24 |
Front wheel bearings have excessive free play |2.3.5b| | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 15 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 11 |
Headlamp insecure |1.2.3b| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Nearside Rear Direction indicator not working |1.5.1c| | 8 |
Offside Front Direction indicator not working |1.5.1c| | 8 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
Offside Front Direction indicator insecure |1.5.3b| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 6 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 6 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
Front Brake disc|s| excessively worn |3.2.A1l| | 6 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 4 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 4 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Headlamp aim not tested |1.6| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Offside Rear Direction indicator insecure |1.5.3b| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 3 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Stop lamp does not emit a steady light |1.3.1b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |