Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Registration plate lamp issues | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake pedal is inoperative |3.1.3c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Front Steering operation fouling on the fuel tank or bodywork on full lock throttle cards touching |2.1.4 |b|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Stop lamp not working front stop light switch (4.3.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Rear Brake linkage has restricted free movement |1.1.15 |e|| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear position lamp incorrect colour reg plate lamp was showing white light to the rear |1.1.2b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
All position lamps do not illuminate immediately when switched on front side light |1.1.3a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |