Most common failures | No# failures |
---|
Horn not working |1.7.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp aim out of alignment | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Seat insecure |6.2.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Nearside Front Position lamp not working side light |4.2.1 |a|| | 1 |
Nearside Rear Rear reflector missing |1.5.1a| | 1 |
Offside Rear Rear reflector missing |1.5.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Roller brake test indicates a binding brake Rear |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies Front |1.3.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |