Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Registration plate issues | 9 |
Horn not working |1.7.3a| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Rear Braking system leaking |3.6.A.1| | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Stop lamp(s) all not working controll 2 (4.3.1 (a) (iii)) | 1 |
Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Centre Front Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear wheel spindle securing nut locking device missing split pin |2.4.A.2b| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake component insecure split pin in rear torque arm bolt missing (1.1.21 (c)) | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Vehicle identification number not displayed no vin required |0.2 |a|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicators flashing more than 120 times per minute all |1.5.1c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Stop lamp missing |4.3.1 |a| |ii|| | 1 |
Front Stop lamp missing (4.3.1 (a) (ii)) | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Outer Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Inner Rear Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Inner Front Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
An item not tested |Manual| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |