| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Registration plate issues | 3 |
| Stop lamp remains on when the brakes are released | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Stop lamp does not illuminate immediately a brake applies front control |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Centre Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Parking brake efficiency below requirements |3.7.C.1b| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Horn missing |1.7.1| | 1 |
| Front Lower Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Nearside Front Inner Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Nearside Obligatory mirror missing (3.3 (a)) | 1 |
| Offside Obligatory mirror missing (3.3 (a)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake pedal has insufficient reserve travel adjusted on test (1.1.2 (a)) | 1 |
| Central Front Fork yoke in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork (5.3.2 (b)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |