Most common failures | No# failures |
---|
Registration plate issues | 6 |
Headlamp aim out of alignment | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Brake hose excessively deteriorated | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain spring clip fitted backwards
|6.2.1h| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Stop lamp not working lever |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working foot brake |4.3.1 |a| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake locking device missing split pin mising |3.2.A1e| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Brake locking device missing rear brake plate arm bolts |3.2.A1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel fixing loose |single fixing| Spindle loose |5.2.1 |a| |ii|| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front Lower Floor brake test indicates a binding brake Brake Binding Front |3.3.C2c| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain Link Fitted Incorrectly WRONG WAY ROUND |6.2.1h| | 1 |
Central Front Handlebar mounting clamp bolt loose Both Handle Bars Loose On Top Yoke Fitting |2.1.1a| | 1 |
Brake component insecure torque arm bolt loose split pin missing |1.1.21 |c|| | 1 |
Brake excessively binding |1.2.1 |f|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected bearings tight |2.2.2 |f| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Nearside Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Rear axle not tight, wheel moving. (5.2.1 (c) (ii)) | 1 |
Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Handlebar retaining device missing Bar Mounts need split pins. (2.2.1 (b) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Swing Arm (6.1.1 (c) (i)) | 1 |
Direction indicator not working |1.5.1c| | 1 |
Stop lamp adversely affected by the operation of another lamp rear position lamp (4.3.3 (b)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Rear Shock absorbers insecurely attached secondary shock lower bolt missing (5.3.2 (a) (i)) | 1 |
Emissions not tested (8.2.1.2 (d)) | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering column top bearing excessively worn |2.1.2c| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Fuel tank leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |