Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Registration plate issues | 2 |
Rear Wheel spoke cracked (5.2.2 (d)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake locking device missing rear torque arm forward mounting bolt |3.2.A1e| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
All direction indicators incorrect colour |4.4.3 |a|| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel cap does not fasten securely by a positive means breather cap |7.2.2b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Stop lamp affected by the operation of another lamp stop and tail round the wrong way |1.3.2| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Rear Brake lever has insufficient reserve travel cable snapped upon application |1.1.2 |a|| | 1 |
Nearside Rear Brake cable damaged snapped |1.1.15 |a|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock left hand (2.1.4 (b)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Brake lagging in operation creeps under load (1.2.1 (d)) | 1 |
Nearside Front Brake disc insecure Bolt sheared (1.1.14 (a) (ii)) | 1 |
Offside Front Brake disc insecure Bolt sheared (1.1.14 (a) (ii)) | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure Cross member securing bolt missing (6.1.1 (b) (i)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Horn not working |1.7.3a| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake pedal pivot excessively worn Side movement pedal fouling frame guard restricting movement (1.1.1 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |