| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Registration plate issues | 6 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
| Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Headlamp aim not tested |4.1.2 |b|| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Horn not working |1.7.3a| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Direction indicator not working all |1.5.1c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Rear wheel spindle securing nut locking device missing split pin missing |2.4.A.2b| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear suspension bush has excessive free play swing arm bush |2.4.A2a|i|| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Direction indicator not working Incorrect indicator operating when in use . Front indicator|s| wired incorrectly. |4.4.1 |a| |ii|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Handlebar handgrip missing |2.1.1c| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component forks |2.3.4| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Road spring insecure |5.3.1 |a| |i|| | 1 |
| Front Wheel fixing missing |single fixing| spindle split pin missing |5.2.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Front Valve stem seriously misaligned |5.2.3 |j|| | 1 |
| Rear Valve stem seriously misaligned |5.2.3 |j|| | 1 |
| Front Brake hose bulging under pressure pipe from reservoir to splitter affected |1.1.12 |d|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Central Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Offside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure Rear brake arm split pin missing. (6.1.1 (b) (i)) | 1 |
| Steering operation restricted in free movement from lock to lock Wire cover not secured (2.1.4 (c)) | 1 |
| Registration plate lamp issues | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake component insecure Brake anchor securing pins missing (1.1.21 (c)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Chain guard insecure (6.1.7 (i)) | 1 |
| Offside Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Drive chain so worn it is likely to fail Drive Chain/Sprocket Fitted incorrectly cutting into Engine casing (6.1.7 (c) (ii)) | 1 |
| Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Fuel tank leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Brake component insecure rear brake pivot no locking device fitted (1.1.21 (c)) | 1 |
| Fuel hose insecure hose clip not fitted corectly (6.1.3 (a) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Rear Brake component insecure Brake Torsion Arm Nut Missing (1.1.21 (c)) | 1 |
| Fuel system component leaking tank (6.1.3 (b) (i)) | 1 |
| Front All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Fuel hose so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Throttle operating incorrectly lock to lock revving (6.2.7 (a) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Drive chain sprocket excessively loose carrier bearing (6.1.7 (c) (i)) | 1 |
| Front Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Front Steering linkage locking device missing (2.1.3 (d)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake component insecure (1.1.21 (c)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Front Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |