Most common failures | No# failures |
---|
Headlamp aim out of alignment | 24 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Registration plate issues | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Roller brake test indicates excessive fluctuation of brake effort rear disc req |3.3.A1d| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake performance not tested Rear pads are too low to performance test as damage may be caused to the machine |1.2.1 |g|| | 1 |
Brake performance not tested Due to pads |3.3| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp not working on front brake lever (4.3.1 (a) (ii)) | 1 |
Stop lamp not working rear brake lever (4.3.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Fuel cap missing (6.1.3 (b) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp does not illuminate immediately a brake applies from operation of rear switch. |1.3.1a| | 1 |
Nearside Stop lamp not working brake leaver (4.3.1 (a) (ii)) | 1 |
Front Brake disc contaminated oil (1.1.14 (b)) | 1 |
Shock absorber has a serious fluid leak R/H (5.3.2 (b)) | 1 |
Rear Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
Horn not working Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp not working Stop lamp not working with front application (4.3.1 (a) (ii)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Exhaust has a major leak of exhaust gases excessive leak of exhaust gasses at silencer joint. (6.1.2 (a)) | 1 |
Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Rear Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Front control not working (4.3.2 (a) (iii)) | 1 |
Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Shock absorber has a serious fluid leak Both front fork seals failed. fluid leak (5.3.2 (b)) | 1 |