| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 21 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Registration plate issues | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Registration plate lamp issues | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Vehicle identification number not legible |6.3.5a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Shock absorber has a serious fluid leak fork seals (5.3.2 (b)) | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Front Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Shock absorber insecurely attached Shock absorber missing securing nut. (5.3.2 (a) (i)) | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Stop lamp not working stop lamp not opperational from front contol. (4.3.1 (a) (ii)) | 1 |
| Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
| Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Handlebar grip insecure to handlebar left (2.2.1 (d) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |