Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 69 |
Headlamp aim out of alignment | 65 |
Registration plate issues | 35 |
Drive chain worn to excess |6.2.1e| | 30 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 27 |
Fuel cap sealing washer missing |7.2.2c| | 27 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 23 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 20 |
Drive chain excessively loose |6.2.1d| | 20 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 15 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 13 |
Front wheel bearings are excessively rough |2.3.5b| | 13 |
Front wheel bearings have excessive free play |2.3.5b| | 13 |
Horn not working |1.7.3a| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Nearside Rear Direction indicator not working |1.5.1c| | 11 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 10 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 10 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
Offside Front Direction indicator not working |1.5.1c| | 9 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Handlebar deformed |2.1.1b| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Brake locking device missing |3.2.A1e| | 8 |
Drive chain excessively tight |6.2.1d| | 8 |
Rear Wheel spoke excessively loose |4.2.1b| | 7 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 6 |
Headlamp switch faulty |1.2.4| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear Brake locking device missing |3.2.A1e| | 5 |
Rear Drive chain excessively loose |6.2.1d| | 5 |
Rear Drive chain worn to excess |6.2.1e| | 5 |
Rear reflector on motorcycle obscured |1.4.1| | 5 |
Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
Front suspension assembly component excessively misaligned |2.3.1| | 5 |
Direction indicators not working |1.5.1c| | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Front Wheel spoke excessively loose |4.2.1b| | 5 |
Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
Headlamp aim not tested |1.6| | 4 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 4 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Rear Brake reaction bracket insecure |3.2.A1j| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Drive chain sprocket worn to excess |6.2.1e| | 4 |
Front Stop lamp missing |1.3.3a| | 4 |
Rear Direction indicator not working |1.5.1c| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Fuel system component insecure |7.2.1b| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 3 |
Offside Footrest insecure |6.2.1a| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Stop lamp does not emit a steady light |1.3.1b| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Front Direction indicator not working |1.5.1c| | 2 |
Brake lever cannot be released smoothly |3.1.3d| | 2 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Front Brake lever pivots excessively worn |3.1.3a| | 2 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Rear Upper Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Wheel spoke excessively bent |4.2.1b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Horn is not continous or uniform |1.7.3c| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 2 |
Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Exhaust has part of the system missing |7.1.1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Rear position lamp damaged and function impaired |1.1.1b| | 2 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm locking pin |6.2.1h| | 2 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Front Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Lower Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Centre Front Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Centre Rear Upper Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Chain guard insecure |6.2.1c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear suspension bush has excessive free play swingarm |2.4.A2a|i|| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Outer Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Brake lever mounting cracked |3.1.2c| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Brake cable badly frayed |3.2.A1b| | 1 |
Centre Rear Brake locking device missing |3.2.A1e| | 1 |
Centre Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Centre Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear Footrest missing |6.2.1a| | 1 |
Offside Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Wheel spoke excessively loose Several (5.2.2 (d)) | 1 |
Rear Wheel spoke excessively loose Several (5.2.2 (d)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Direction indicator not working R/H/R (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp not working Flickers if applied hard (4.3.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Handlebar grip insecure to handlebar L/H (2.2.1 (d) (ii)) | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Rear Brake reaction bracket excessively worn lock nut loose& splitpin missing (1.1.15 (b)) | 1 |
Rear Lower Suspension attachment bracket/mounting insecure linkage (5.3.3 (a) (i)) | 1 |
Rear Lower Suspension component pin or bush excessively worn linkage bushes / bearings (5.3.4 (a) (i)) | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Brake reaction bracket securing bolt|s| loose split pin missing |3.2.A1j| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Centre Drive chain excessively loose |6.2.1d| | 1 |
Centre Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Upper Direction indicator not working |1.5.1c| | 1 |
Offside Front Upper Direction indicator not working |1.5.1c| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Rear Lower Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Rear Wheel spoke excessively loose snapped |4.2.1b| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Brake linkage excessively damaged |3.2.A1c| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Lower Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Front Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Brake cable excessively corroded |3.2.A1b| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension bush has excessive free play shock links |2.4.A2a|i|| | 1 |
Rear position lamp adversely affected by the operation of another lamp indicators |1.1.3b| | 1 |
Headlamp main beam affected by the operation of another lamp indicators |1.2.2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Fuel cap ineffective washer replaced (6.1.3 (b) (i)) | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Brake component is fractured |3.1.5| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear reflector on sidecar incorrectly positioned |1.4.2d| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear Brake pivot excessively worn |1.1.15 |b|| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp dipped beam affected by the operation of another lamp Lights up with stop light |1.2.2c| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |