Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 15 |
Headlamp aim out of alignment | 11 |
Registration plate issues | 10 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Horn not working |1.7.3a| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Direction indicators not working |1.5.1c| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Rear position lamp damaged and function impaired |1.1.1b| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Headlamp switch faulty |1.2.4| | 1 |
Centre Upper Fuel cap sealing washer missing |7.2.2c| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Centre Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Inner Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Front Fuel system component leaking |7.2.1a| | 1 |
Offside Front An item not tested |Manual| | 1 |
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake cable insecure |1.1.15 |c|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp does not illuminate immediately a brake applies off front lever |1.3.1a| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake lever mounting cracked |3.1.2c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim not tested |1.6| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Upper Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Throttle operating incorrectly throttle does not return |6.2.1f| | 1 |
Rear suspension bush has excessive free play bottom link bearing |2.4.A2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake light switch does not function |1.3.1a| | 1 |