Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp aim out of alignment | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Registration plate issues | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Throttle operating incorrectly |6.2.1f| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake lever cracked |3.1.2c| | 1 |
Horn not working |1.7.3a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake lever excessively damaged |3.2.A1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |