| Most common failures | No# failures |
|---|
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Fuel cap sealing washer missing |7.2.2c| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Riders seat insecure |6.2.1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Rear mono-shock insecure |2.4.B.4| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Headlamp aim out of alignment | 1 |
| Nearside Fuel system component leaking |7.2.1a| | 1 |
| Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Front Position lamp not working Bulb |4.2.1 |a|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Outer Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Horn missing |1.7.1| | 1 |
| Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Brake pedal insecure |3.1.2a| | 1 |
| Front Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
| Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |