Most common failures | No# failures |
---|
Headlamp aim out of alignment | 156 |
Registration plate issues | 111 |
Rear reflector on motorcycle missing |1.4.1| | 106 |
Headlamp aim beam image kick up to the offside |1.6| | 50 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 42 |
Horn not working |1.7.3a| | 38 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 33 |
Registration plate lamp issues | 31 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 31 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 24 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 24 |
Drive chain excessively tight |6.2.1d| | 21 |
Rear Rear reflector on motorcycle missing |1.4.1| | 20 |
Drive chain excessively loose |6.2.1d| | 18 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 18 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 17 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 17 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 16 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 16 |
Exhaust is leaking and excessively noisey |7.1.1b| | 16 |
Brake pipe excessively corroded | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 14 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 13 |
Drive chain worn to excess |6.2.1e| | 13 |
Riders seat insecure |6.2.1a| | 12 |
Nearside Front Direction indicator not working |1.5.1c| | 11 |
Offside Front Direction indicators not working |1.5.1c| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 10 |
Windscreen wiper does not clear the windscreen effectively | 10 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Horn not loud enough to be heard by another road user |1.7.3a| | 10 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Front Horn not working |1.7.3a| | 9 |
Front Steering headbearing has excessive free play |2.2.2| | 9 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 9 |
Nearside Rear Direction indicators not working |1.5.1c| | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Nearside Front Direction indicators not working |1.5.1c| | 8 |
Rear reflector missing (4.8.2 (a) (ii)) | 8 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Offside Rear Direction indicator not working |1.5.1c| | 7 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 7 |
Throttle operating incorrectly |6.2.1f| | 7 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 7 |
Front Brake excessively binding (1.2.1 (f)) | 7 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
Rear reflector missing |4.8.2 |a| |ii|| | 6 |
Rear Drive chain excessively loose |6.2.1d| | 6 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 5 |
Emissions not tested |7.0| | 5 |
Offside Front Footrest insecure |6.2.1a| | 5 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Front Front wheel bearings are excessively rough |2.3.5b| | 5 |
Front Headlamp aim beam image kick up to the offside |1.6| | 5 |
All direction indicators not working (4.4.1 (a) (ii)) | 5 |
Offside Stop lamp not working |1.2.1b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Fuel hose leaking |7.2.1a| | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 4 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |