| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 50 |
| Registration plate issues | 23 |
| Rear reflector on motorcycle missing |1.4.1| | 20 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Horn not working |1.7.3a| | 14 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 9 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
| Steering headbearing has excessive free play |2.2.2| | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
| Direction indicators not working |1.5.1c| | 7 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Nearside Front Direction indicators not working |1.5.1c| | 6 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 6 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 6 |
| Front suspension has inadequate damping effect. |2.3.6c| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 5 |
| Offside Rear Direction indicator insecure |1.5.3b| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Front Horn not working |1.7.3a| | 5 |
| Rear Wheel spoke excessively loose |4.2.1b| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Offside Rear Direction indicators not working |1.5.1c| | 4 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Headlamp switch faulty |1.2.4| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front Direction indicators not working |1.5.1c| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Front Steering lock stop ineffective |2.1.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
| Offside Rear Lower Brake reaction bracket insecure |3.2.A1j| | 2 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Fuel hose leaking |7.2.1a| | 2 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Centre Front Horn not working |1.7.3a| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
| All direction indicators not working light but do not flash on near side |4.4.1 |a| |ii|| | 1 |
| Front Steering lock stop missing |2.1.3| | 1 |
| Nearside Footrest insecure bolt missing |6.2.1a| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Brake lever insecure |3.1.2a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Side repeater insecure |1.4.A.2b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Lower Motorcycle structure adversely modified |6.1.1b| | 1 |
| Offside Front Motorcycle structure cracked |6.1.1a| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Lower Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Nearside Fuel system component leaking |7.2.1a| | 1 |
| Nearside Fuel tank leaking |7.2.1a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Rear Lower Riders seat insecure |6.2.1a| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Front Brake cable excessively corroded |3.2.A1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Rear Brake component leaking fluid |3.2.B4| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front An item not tested |Manual| | 1 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Offside Front Brake hose twisted |3.6.B.4c| | 1 |
| Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Offside Rear Lower Brake back plate|s| insecure |3.2.A1j| | 1 |
| Offside Rear Lower Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Rear Brake performance not tested |3.3| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Rear fog lamp emits a light other than red |1.3.2e| | 1 |
| Front Steering damper leaking oil |2.2.C.1f| | 1 |
| Vehicle Identification Number not permanently displayed |6.3.5.a| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Forks excessively corroded |2.2.2 |d| |i|| | 1 |
| Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Direction indicator not working |1.4.A.2c| | 1 |
| Registration plate lamp issues | 1 |
| Rear Brake cable locking device missing |3.5.1l| | 1 |
| Offside Brake pedal has excessive side movement indicating a badly worn bearing or pivot |3.3.A.1d| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Headlamp main beam affected by the operation of another lamp main beam not staying on faulty dip pattern |1.2.2c| | 1 |
| Position lamp not working side light |4.2.1 |a|| | 1 |
| Rear All position lamps not working |4.2.1 |a|| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Brake effort inadequate at a wheel no reserve travel on lever |1.2.1 |a| |i|| | 1 |
| Drive chain worn to excess chain is jumping |6.1.7 |c| |i|| | 1 |
| Front Steering headbearing has excessive free play adjusted steering bearings to eliminate free play. |2.2.2| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling Adjusted rear wheel alignment. |2.5.1| | 1 |
| Direction indicator affected by the operation of another lamp Headlights |1.5.1c| | 1 |
| Headlamp switch faulty dip on main beam and vice versa |1.2.4| | 1 |
| Throttle operating incorrectly not self closing |6.2.1f| | 1 |
| Nearside Lower Front suspension assembly excessive wear or free play in a front suspension component arm bush |2.3.4| | 1 |
| Offside Lower Front suspension assembly excessive wear or free play in a front suspension component arm bush |2.3.4| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake arm split pin missing |6.2.1h| | 1 |
| Front Floor brake test indicates a binding brake brake springs dragging on hub |3.3.C2c| | 1 |
| Rear Floor brake test indicates a binding brake brake springs dragging on hub |3.3.C2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling rear wheel very off line, front of wheel to offside |2.5.1| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension exhaust mounted to swingarm |2.4.A.3a| | 1 |
| Rear suspension bush has excessive free play swingarm |2.4.A2a|i|| | 1 |
| Rear suspension component loose swingarm pivot nut loose |2.4.A.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system mounted to swingarm, so flexing exhaust over bumps |7.1.1.c| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Direction indicators not working with lights on |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies with lights on |1.3.1a| | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Shock absorber has a serious fluid leak Rear shock (5.3.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Brake rod insecure (1.1.15 (c)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Brake lever excessively worn BROKEN (1.1.15 (b)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |