Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Registration plate issues | 21 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Rear reflector on motorcycle missing |1.4.1| | 20 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Horn not working |1.7.3a| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Nearside Front Direction indicators not working |1.5.1c| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Offside Front Direction indicators not working |1.5.1c| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Brake pedal cannot be released smoothly |3.1.3d| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear wheel insecure |4.2.3b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Brake pipe union leaking fluid |3.2.B4| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Brake reaction bracket insecure |3.2.A1j| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Stop lamp deteriorated and function impaired |1.3.3a| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Registration plate lamp issues | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Fuel system component leaking |6.1.3 |b| |i|| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Riders seat insecure |6.2.5 |a| |ii|| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear Brake component is fractured |3.1.5| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Headlamp missing |1.7.3| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Offside Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Centre Front Riders seat insecure |6.2.1a| | 1 |
Offside Front Motorcycle structure adversely modified |6.1.1b| | 1 |
Nearside Front Fuel hose leaking |7.2.1a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
All direction indicators light intensity significantly reduced Only lighting up at high engine revs |4.4.3 |a|| | 1 |
All direction indicators light intensity significantly reduced Do not light up when other lighting is switched on |4.4.3 |a|| | 1 |
Stop lamp light intensity significantly reduced Cannot distinguish stop lamp from position lamp when position lamp is switched on |4.3.3 |a| |ii|| | 1 |
Headlamp light intensity severely reduced Significantly reduced when indicators are switched on |4.1.4 |a|| | 1 |
Brake hose leaking Hose leaking under pressure at lower union |1.1.12 |c|| | 1 |
Brake hose connection leaking Upper banjo union leaking under pressure |1.1.12 |c|| | 1 |
Brake hose connection leaking Lower banjo union leaking under pressure |1.1.12 |c|| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Horn control defective |1.7.2a| | 1 |
Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Direction indicators not working All |1.4.A.2c| | 1 |
Nearside Front Front shock absorber leaking oil |9.2.7b| | 1 |
Horn not working |1.6.2a| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Horn control defective |1.7.2a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Nearside Front Axle beam distorted |2.5.A.5b| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Fuel tank leaking |7.2.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Nearside Front Outer Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Central Front Upper Horn not working |1.7.3a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Shock absorber has negligible damping effect both rear shocks |5.3.2 |b|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Brake component leaking fluid |3.2.B4| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Rear Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Handlebar fractured |2.1.1b| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Throttle operating incorrectly sticking - not returning correctly |6.2.1f| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride gear selector |6.2.1h| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Motorcycle structure adversely modified top engine mounting missing |6.1.1b| | 1 |
Motorcycle structure cracked rear lower engine mounting bolt broken |6.1.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking rear main mounting loose |6.1.1c| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied Hitting exhaust when applied! |1.1.2 |d|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Handlebar retaining device loose Both sides |2.2.1 |b| |i|| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front Service brake grabbing severely |3.7.C.2| | 1 |
Centre Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Rear reflector missing |1.5.1a| | 1 |
Offside Rear Rear reflector missing |1.5.1a| | 1 |
Centre Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Horn control missing |1.6.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Centre Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Offside Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Rear Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Nearside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering linkage locking device missing |2.1.3 |d|| | 1 |
Rear Rear wheel rotation likely to be impeded Rear Mudguard. insecure likely to come away and foul Rear wheel |6.2.1b| | 1 |
Direction indicators affected by the operation of another lamp Battery is flat and charging system cant cope when lights switch on |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Nearside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Upper Suspension arm attachment bracket/mounting insecure bolt loose (5.3.3 (a) (i)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Central Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling chain adjusters set inequally causing rear wheel to misalign with front. (2.4 (a)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |