Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 5 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Headlamp aim out of alignment | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Registration plate issues | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Registration plate lamp issues | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Emissions not tested excessive smoke (8.2.1.2 (d)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Offside Side repeater obscured more than 50% |1.4.A.2d| | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Rear fog lamp tell tale missing |1.3.1b| | 1 |
Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Seat belt anchorage loose (7.1.1 (b)) | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
Nearside Front Service brake lagging in operation (1.2.1 (d)) | 1 |
Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Service brake excessively binding (1.2.1 (f)) | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i)) | 1 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded alone complete length (6.1.1 (c) (i)) | 1 |
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded along complete length (6.1.1 (c) (i)) | 1 |
Offside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
Nearside Front Wheel hub spigot mounting excessively worn (5.2.1 (b) (i)) | 1 |
Offside Front Wheel hub spigot mounting excessively worn (5.2.1 (b) (i)) | 1 |
Nearside Rear Brake drum contaminated (1.1.14 (b)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |