Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 29 |
Headlamp aim out of alignment | 16 |
Registration plate issues | 15 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear Brake disc|s| cracked |3.2.A1g| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working |1.7.3a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Direction indicators not working |1.5.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Direction indicator missing |1.5.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Footrest missing |6.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Lower Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension component loose swing arm pivot bolt
|2.4.A.1a| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Horn not working (7.7 (a)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake hose excessively deteriorated | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Motorcycle structure cracked |6.1.1a| | 1 |
Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc(s) cracked (3.2.A1g) | 1 |
Fuel cap sealing washer deteriorated (7.2.2c) | 1 |
Offside Front Footrest insecure hanger cracked (6.2.1a) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Horn control defective |1.7.2a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Registration plate lamp issues | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Centre Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Suspension arm attachment bracket/mounting insecure Swing arm pivot nut is loose. (5.3.3 (a) (i)) | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
An item not tested |Manual| | 1 |
Offside Brake pedal insecure |3.1.2a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |