| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Stop lamp not working Number Plate Light (4.3.1 (a) (ii)) | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Brake hose leaking master cylinder banjo washer weeping (1.1.12 (c)) | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Registration plate issues | 1 |
| Footrest missing |6.2.1a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Horn not working |1.7.3a| | 1 |