Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp aim out of alignment | 4 |
Registration plate issues | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
Front Steering operation linkage fouling when handlebars turned from lock to lock fouling wires |2.1.4 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Footrest missing Passenger L/H |6.2.1a| | 1 |
Front shock absorber seal failed and leaking oil R/H fork |2.3.3| | 1 |
Headlamp switch insecure R/H switch assembly |throttle| |1.2.4| | 1 |
Fairings insecure and likely to impede the steering Front mudguard |2.1.2e| | 1 |
Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak Both (5.3.2 (b)) | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |