Most common failures | No# failures |
---|
Registration plate issues | 8 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Parking brake efficiency below requirements |3.7.C.1b| | 3 |
Nearside Obligatory mirror missing |8.1.1| | 3 |
Headlamp aim out of alignment | 3 |
Horn not working |1.6.2a| | 3 |
Direction indicators not working |1.4.A.2c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 2 |
Indicator tell tale missing |1.4.A.2a| | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
Direction indicators missing |1.4.A.2b| | 2 |
Front Stop lamp not working |1.2.1b| | 2 |
Offside Obligatory mirror missing |8.1.1| | 2 |
Rear reflector missing |1.5.1a| | 2 |
Front Headlamp not working on main beam |1.7.5a| | 2 |
Parking brake not fitted on at least two wheels |3.1.1| | 2 |
Nearside Outer Steering locking device missing |2.2.C.1g| | 1 |
Offside Inner Steering locking device missing |2.2.C.1g| | 1 |
Offside Outer Steering locking device missing |2.2.C.1g| | 1 |
Steering locking device missing |2.2.C.1g| | 1 |
Steering column locking device missing |2.1.6| | 1 |
Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
Nearside Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
Offside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
Offside Front suspension has a suspension upper ball joint securing nut loose |2.5.B.1a| | 1 |
Nearside Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
Centre Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
Offside Wheel hub spigot mounting excessively worn |4.2.B.5| | 1 |
Nearside Front Upper Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Upper Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front suspension has a suspension lower ball joint securing nut loose |2.5.B.1a| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Hand operated control valve gate and/or locating mechanism excessively worn and cannot be held in the on position |3.2.1e| | 1 |
Offside Rear Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Nearside Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Offside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Nearside Rear Rear reflector missing |1.5.1a| | 1 |
Offside Rear Rear reflector missing |1.5.1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear brake disc locking device insecure |3.5.1l| | 1 |
Rear Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Stop lamp not working |1.2.1b| | 1 |
Centre Front position lamp|s| not working |1.1.A.3b| | 1 |
Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
Nearside Rear Inner Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Inner Rear wheel bearing has excessive play |2.6.2| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Rear Suspension unit damaged or deteriorated and function affected |5.3.5 |b| |i|| | 1 |
Offside Front Upper Suspension arm ball joint likely to become detached split pin missing |5.3.4 |a| |ii|| | 1 |
Nearside Front Lower Suspension arm ball joint likely to become detached split pin missing |5.3.4 |a| |ii|| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Registration plate lamp issues | 1 |
Rear Stub axle has excessive vertical movement between stub axle and axle beam (5.1.2 (c) (i)) | 1 |
Nearside Inner Steering locking device missing |2.2.C.1g| | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Parking brake lever missing (1.1.6 (d)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Stop lamp(s) not working front brake control (4.3.1 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |