Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Registration plate issues | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Drive belt worn to excess |6.2.1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Headlamp at least one does not illuminate on dipped beam non of side lights work |1.2.2a|i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies no brake lights |1.3.1a| | 1 |
Headlamp at least one does not illuminate on main beam no main beam |1.2.2a|ii|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Lower Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working |1.7.3a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |