MOT History from tests of petrol SUZUKI INTRUDERs year 1990

Review the list of common SUZUKI INTRUDER failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:72.73%

(The average a petrol SUZUKI INTRUDER year 1990 passes without issue)

Based on:77 MOT Tests

Most common failures	No# failures
Registration plate issues	3
Headlamp aim out of alignment	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Horn not working \|1.7.3a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	1
Rear Front mudguard insecure \|2.3.7\|	1
Rear Wheel spoke excessively loose \|4.2.1b\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Offside Front Upper Stop lamp not working brake switch light faulty (4.3.1 (a) (ii))	1
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Direction indicators not working \|1.5.1c\|	1
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	1
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Offside Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Front Brake excessively binding (1.2.1 (f))	1
Horn not working (7.7 (a))	1
Nearside Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	3
Headlamp aim out of alignment	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Horn not working \|1.7.3a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	1
Rear Front mudguard insecure \|2.3.7\|	1
Rear Wheel spoke excessively loose \|4.2.1b\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Offside Front Upper Stop lamp not working brake switch light faulty (4.3.1 (a) (ii))	1
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Direction indicators not working \|1.5.1c\|	1
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	1
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Offside Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Front Brake excessively binding (1.2.1 (f))	1
Horn not working (7.7 (a))	1
Nearside Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1

MOT History from tests of petrol SUZUKI INTRUDERs year 1990

Find us on Facebook