Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Brake hose excessively deteriorated | 11 |
Headlamp aim beam image kick up to the offside |1.6| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Registration plate issues | 6 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Brake hose damaged | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride locking nut or split pin missing from torque arm |6.2.1h| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket nuts loose |6.2.1h| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Throttle operating incorrectly |6.2.1f| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
An item not tested |Manual| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Sidecar attachment fractured |5.1.1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Horn not working |1.7.3a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake locking device missing t/arm |3.2.A1e| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Brake pipe excessively corroded | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Rear Stop lamp remains on when the brake is released (1.3.1e) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front An item not tested |Manual| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Horn missing |1.7.1| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |