Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Registration plate issues | 3 |
Brake hose excessively deteriorated | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Brake lever insecure locking split pin missing at pivot bolt |3.1.2a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Exhaust excessively deteriorated centre |7.1.1a| | 1 |
Drive chain fouling another component fouling exhaust |6.2.1d| | 1 |
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Lower Brake pedal insecure |3.1.2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |