Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Brake hose excessively deteriorated | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Horn not working |1.7.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Registration plate issues | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Brake component insecure No pinch bolt. (1.1.21 (c)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Brake hose damaged | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |