MOT History from tests of petrol SUZUKI GT380s year 1978

Review the list of common SUZUKI GT380 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:90.00%

(The average a petrol SUZUKI GT380 year 1978 passes without issue)

Based on:210 MOT Tests

Most common failures	No# failures
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp aim out of alignment	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Centre Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Wheel spoke missing \|4.2.1b\|	1
Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Drive chain excessively tight \|6.2.1d\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Chain guard insecure \|6.2.1c\|	1
Nearside Front Lower Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Lower Direction indicators not working \|1.5.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Horn not working \|1.7.3a\|	1
Brake hose excessively deteriorated	1
Front Brake lever is positioned so that the brake cannot be readily applied \|3.1.3c\|	1
Riders seat insecure \|6.2.1a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp aim out of alignment	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Centre Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Wheel spoke missing \|4.2.1b\|	1
Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Drive chain excessively tight \|6.2.1d\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Chain guard insecure \|6.2.1c\|	1
Nearside Front Lower Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Lower Direction indicators not working \|1.5.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Horn not working \|1.7.3a\|	1
Brake hose excessively deteriorated	1
Front Brake lever is positioned so that the brake cannot be readily applied \|3.1.3c\|	1
Riders seat insecure \|6.2.1a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1

MOT History from tests of petrol SUZUKI GT380s year 1978

Find us on Facebook