Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Horn not working |1.7.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Direction indicator not working |1.5.1c| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies New bulb fitted |1.3.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Brake hose excessively deteriorated | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp dipped beam affected by the operation of another lamp high beam on at the same time as low beam |1.2.2c| | 1 |
Central Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies adjusted brake light switch |1.3.1a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |