| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 50 |
| Rear reflector on motorcycle missing |1.4.1| | 34 |
| Registration plate issues | 22 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 13 |
| Horn not working |1.7.3a| | 12 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Offside Front Direction indicator not working |1.5.1c| | 7 |
| Offside Front Footrest insecure |6.2.1a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Nearside Front Footrest insecure |6.2.1a| | 5 |
| Direction indicators not working |1.5.1c| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Stop lamp remains on when the brakes are released | 2 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Footrest insecure |6.2.1a| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Rear Brake pedal insecure |3.1.2a| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Brake excessively binding |1.2.1 |f|| | 2 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front All direction indicators adversely affected by the operation of another lamp x2 (4.4.3 (b)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Fuel system component leaking carburettor area (6.1.3 (b) (i)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Fuel system component leaking carbs |7.2.1a| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Headlamp not working on dipped beam both bulbs out. (4.1.1 (a) (ii)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake component insecure Front pad locking devices missing (1.1.21 (c)) | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Horn missing |1.7.1| | 1 |
| Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Direction indicator flashing more than 120 times per minute all 4 |1.5.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Direction indicators not working all four |1.5.1c| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake performance not tested Excessive binding (1.2.1 (g)) | 1 |
| Rear Brake performance not tested Excessive binding (1.2.1 (g)) | 1 |
| Front Valve stem seriously damaged Valve stem perished (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged Valve stem perished (5.2.3 (j)) | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| An item not tested |Manual| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp not working off front brake (4.3.1 (a) (ii)) | 1 |
| Stop lamp not working front (4.3.1 (a) (ii)) | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Centre Rear Lower Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Nearside Front Brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Headlamp incorrect colour |1.2.1| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Headlamp insecure |1.2.3b| | 1 |