Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 16 |
Headlamp aim out of alignment | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Registration plate issues | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Drive chain excessively tight |6.2.1d| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Offside Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Rear Rear suspension component misaligned |2.4.A.1a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear reflector missing tape type fitted (4.8.2 (a) (ii)) | 1 |
Nearside Front Brake disc significantly and obviously worn worn disc buttons (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn worn disc buttons (1.1.14 (a) (i)) | 1 |
Stop lamp does not emit a steady light comes on then goes out with steady pressure on lever |1.3.1b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |