Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Registration plate issues | 19 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Horn not working |1.7.3a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Registration plate lamp issues | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Footrest missing |6.2.1a| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Rear Stop lamp does not illuminate by the operation of both brake controls Rear brake light switch required adjusting (4.3.2 (a) (iii)) | 1 |
Offside Front Upper Handlebar fouling on the fuel tank or bodywork on full lock clip on handlebar adjusted (2.1.4 (b)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Stop lamp not working on front leaver (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Inner Rear Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Outer Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Inner Front Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Lower Direction indicator not working |1.5.1c| | 1 |
Inner Rear Lower Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Central Front Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Front Front position lamp missing inoperative |1.1.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Headlamp insecure |1.2.3b| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp not working Repaired (4.3.1 (a) (ii)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Stop lamp does not illuminate immediately a brake applies rear switch |1.3.1a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Centre Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |