Most common failures | No# failures |
---|
Headlamp aim out of alignment | 69 |
Registration plate issues | 57 |
Rear reflector on motorcycle missing |1.4.1| | 46 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Horn not working |1.7.3a| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Drive chain excessively tight |6.2.1d| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Nearside Front Direction indicator not working |1.5.1c| | 5 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Brake hose excessively deteriorated | 5 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
Nearside Front Footrest insecure |6.2.1a| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Registration plate lamp issues | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 4 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Rear Footrest insecure |6.2.1a| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 3 |
Front Direction indicators not working |1.5.1c| | 3 |
Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Footrest insecure |6.2.1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Offside Steering lock stop missing |2.1.3| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Direction indicator missing |1.5.1a| | 2 |
Nearside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 2 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |