Most common failures | No# failures |
---|
Registration plate issues | 36 |
Headlamp aim out of alignment | 30 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Horn not working |1.7.3a| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Registration plate lamp issues | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Offside Headlamp insecure |1.2.3b| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Nearside Front Brake hose stretched by suspension movement |3.2.B3b| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front An item not tested |Manual| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Steering damper insecure |2.1.2d| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Headlamp insecure |1.2.3b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Motorcycle structure cracked |6.1.1a| | 1 |
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Offside Rear Motorcycle structure adversely modified |6.1.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Rear Motorcycle structure has a fracture which is likely to adversely affect braking or steering rear fork pivot spindle. (6.1.1 (a) (ii)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid (3.2.B1e) | 1 |
Offside Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Central Front Upper Horn not working |7.7 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Stop lamp not working when front brake applied |4.3.1 |a| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Nearside Rear Drive chain fouling another component |6.2.1d| | 1 |
Rear Direction indicator obscured |1.5.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front An item not tested |Manual| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Steering linkage has excessive free play |2.2.2| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Brake excessively binding (1.2.1 (f)) | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Lower Suspension component pin or bush excessively worn ride height bush (5.3.4 (a) (i)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Central Rear Lower Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Central Rear Upper Position lamp not working |4.2.1 |a|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Centre Riders seat insecure |6.2.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |