Most common failures | No# failures |
---|
Headlamp aim beam image kick up to the offside |1.6| | 30 |
Registration plate issues | 22 |
Headlamp aim out of alignment | 21 |
Rear reflector on motorcycle missing |1.4.1| | 14 |
Horn not working |1.7.3a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Drive chain excessively loose |6.2.1d| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Registration plate lamp issues | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Horn control not functioning. |1.7.2b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Footrest missing |6.2.1a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Engine mounting bolts missing |6.1.1c| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Stop lamp remains on when the brakes are released | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
An item not tested |Manual| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear wheel bearings have excessive free play sprocket carrier |2.4.A.2c| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock front brake lever (2.1.4 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Offside Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect Image kick to offside (4.1.2 (c)) | 1 |
Horn missing |1.7.1| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Central Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front position lamp does not illuminate immediately when switched on side light inop |1.1.3a| | 1 |
Offside Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering disc distorted fouling calliper and affecting brake operation (6.1.1 (a) (ii)) | 1 |
Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |