| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Registration plate issues | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Horn not working |1.7.3a| | 4 |
| Registration plate lamp issues | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Horn not working (7.7 (a)) | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Lower Rear mono-shock insecure |2.4.B.4| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Nearside Front Lower Horn not working (7.7 (a) (ii)) | 1 |
| Lower Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Upper Footrest insecure |6.2.1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Brake reaction bracket insecure holed and corroded |3.2.A1j| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Headlamp aim not tested |1.6| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering operation restricted in free movement from lock to lock USB port hitting RH (2.1.4 (c)) | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Suspension component pin or bush excessively worn rear shock lower mounting pivot bush/bearing |5.3.4 |a| |i|| | 1 |
| Brake disc contaminated front brake discs are contaminated with fork oil |1.1.14 |b|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Drive chain worn to excess uneven wear |6.2.1e| | 1 |
| Front position lamp incorrect colour additional lights |1.1.2a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Shock absorber has a serious fluid leak both front (5.3.2 (b)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen no pattern |1.6.B.1| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Rear Lower Suspension arm pin or bush likely to become detached Linkage bolt (5.3.4 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected switch cube rotating on bar (6.2.7 (a) (ii)) | 1 |
| Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Central Rear Lower Suspension arm ball joint excessively worn rear shock bottom bush mount worn excessive play (5.3.4 (a) (i)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |