Most common failures | No# failures |
---|
Headlamp aim out of alignment | 46 |
Headlamp aim beam image kick up to the offside |1.6| | 13 |
Horn not working |1.7.3a| | 9 |
Drive chain excessively loose |6.2.1d| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Registration plate issues | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Registration plate lamp issues | 3 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Offside Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Central Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Floor brake test indicates a sticking brake brake light remains on |3.3.C2c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bearing has excessive free play Suspension linkage |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Front Valve stem seriously damaged perished excessively (5.2.3 (j)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Direction indicator not working nearside front and back not working |4.4.1 |a| |ii|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Offside Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Offside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Suspension component pin or bush excessively worn lower rear shock pivot bearing/sleeve |5.3.4 |a| |i|| | 1 |
Steering headbearing excessively stiff or notchy excessively notchy |2.2.2 |f| |i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Stop lamp missing switch missing |1.3.3a| | 1 |
Stop lamp not working Front brake switch replaced |4.3.1 |a| |ii|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Horn not working (7.7 (a)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect rear shock does not operate correctly (5.3.2 (b)) | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Brake disc|s| excessively worn bobbins |3.2.A1l| | 1 |
Nearside Rear Motorcycle structure cracked footpeg |6.1.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies not working on rear control |1.3.1a| | 1 |
Lower Rear mono-shock pivot excessively worn shock mount |2.4.B.4| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Lower Rear suspension bush has excessive free play Shock absorber |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Suspension component attachment bracket/mounting damaged and seriously weakened shocker lower mounting (5.3.3 (b) (i)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Motorcycle structure is fractured and structural rigidity is significantly reduced front near exhaust headers (6.1.1 (a) (i)) | 1 |
Front Motorcycle structure inadequately repaired such that structural rigidity is significantly reduced near exhaust headers (6.1.1 (d) (i)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Lower Rear mono-shock pivot excessively worn shockabsorber |2.4.B.4| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Exhaust system insecure Clamp loose |6.1.2 |a|| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Suspension component attachment bracket/mounting corroded and seriously weakened rear shock absorber lower mounting |5.3.3 |b| |i|| | 1 |
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Direction indicator flashing more than 120 times per minute all |1.5.1c| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Drive chain excessively tight Tight links on chain |6.2.1d| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake pedal anti-slip provision loose (1.1.2 (c)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake pedal anti-slip provision missing brake lever rubber missing (1.1.2 (c)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Drive chain horseshoe locking device likely to become detached rivot broken |6.1.7 |j| |ii|| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Chain guard insecure |6.2.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Steering headbearing excessively stiff or notchy stiff and notchy (2.2.2 (f) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls rear not working (4.3.2 (a) (iii)) | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |