Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Registration plate issues | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel spindle loose |2.4.A.2b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake cylinder severely corroded (3.2.B1b) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
An item not tested |Manual| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Headlamp insecure |1.2.3b| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front Upper Brake lever insecure |3.1.2a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake component insecure (1.1.21 (c)) | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Lower Brake hose is likely to be fouled or trapped by moving parts pipes tied back with tie raps |3.2.B2c| | 1 |
Nearside Front Lower Brake hose is likely to be fouled or trapped by moving parts pipes tied back with tie raps |3.2.B2c| | 1 |
Offside Rear Lower Brake locking device insecure |3.2.A1e| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Offside Rear Rear suspension component loose |2.4.A.1a| | 1 |
Offside Rear Brake hose leaking fluid |3.2.B4| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |