Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Drive chain excessively loose |6.2.1d| | 12 |
Registration plate issues | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Drive chain worn to excess |6.2.1e| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Registration plate lamp issues | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Horn not working |1.7.3a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Front Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen new bulb (4.1.2 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Central Front Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake pedal anti-slip provision missing |1.1.2 |c|| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Horn not working (7.7 (a)) | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Stop lamp not working Control 1 (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Clutch lever positioned so it cannot be readily operated (6.2.7 (b)) | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake component insecure front brake lever locking nut missing (1.1.21 (c)) | 1 |
Central Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Front Brake disc|s| insecure worn |3.2.A1g| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil fork |2.3.3| | 1 |
Centre Front Front wheel insecure |4.2.3b| | 1 |
Offside Outer Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
An item not tested |Manual| | 1 |
Front Shock absorber has a serious fluid leak Both front fork seals |5.3.2 |b|| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Stop lamp not working Front brake (4.3.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Stiff and not returning (6.2.7 (a) (ii)) | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |