| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Registration plate issues | 4 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 4 |
| Horn not working |1.7.3a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Brake lever insecure |3.1.2a| | 2 |
| Centre Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 2 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Wheel bearing has excessive play spindle nut loose (5.1.3 (a) (i)) | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
| Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside All direction indicators not working both |4.4.1 |a| |ii|| | 1 |
| Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Registration plate lamp issues | 1 |
| Front Position lamp not working replaced bulb (4.2.1 (a)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Upper Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Plate brake test indicates a severely juddering brake |3.3.B1b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Offside Front Inner Brake component worn and seriously reduced in strength pad lining coming apart |3.2.A1| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Centre Upper Direction indicators not working |1.5.1c| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Front Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected Split pin missing! |5.2.1 |c| |ii|| | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected Split pin missing! |5.2.1 |c| |ii|| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Brake component leaking fluid |3.2.B4| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |