Most common failures | No# failures |
---|
Registration plate issues | 53 |
Headlamp aim out of alignment | 35 |
Rear reflector on motorcycle missing |1.4.1| | 32 |
Registration plate lamp issues | 15 |
Rear reflector missing (4.8.2 (a) (ii)) | 11 |
Horn not working |1.7.3a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 5 |
Front Valve stem seriously damaged (5.2.3 (j)) | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 4 |
Brake pedal cannot be applied smoothly |3.1.3d| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Brake lever pivot excessively tight (1.1.1 (a)) | 1 |
Horn not working sticking press button (7.7 (a)) | 1 |
Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies pedal |1.3.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Suspension component likely to fail (5.3.3 (b) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls not working wih front brake (4.3.2 (a) (iii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Stop lamp not working brake lever (4.3.1 (a) (ii)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear reflector likely to become detached |4.8.1 |b| |ii|| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Lower Brake excessively binding |1.2.1 |f|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Rear reflector on motorcycle missing Replaced |1.4.1| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Front Position lamp not working (4.2.1 (a)) | 1 |
Front Shock absorber has a serious fluid leak forks (5.3.2 (b)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp does not illuminate immediately a brake applies on front control |1.3.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies Brake Light Switch Changed PRS |1.3.1a| | 1 |
Central Rear Lower Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Upper Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Central Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Brake disc significantly and obviously worn front left brake disc worn and has excess run out as shown on rolling brake tester |1.1.14 |a| |i|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Lower Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Headlamp aim headlamp deteriorated and function impaired incorrect image |1.2.3a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Offside Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Throttle operating incorrectly Revving up on lock (6.2.7 (a) (i)) | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |