Most common failures | No# failures |
---|
Headlamp aim out of alignment | 65 |
Registration plate issues | 31 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Headlamp aim not tested (4.1.2 (b)) | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate lamp issues | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
Horn not working (7.7 (a) (ii)) | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Horn not working |1.7.3a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Front Steering headbearing excessively stiff or notchy bottom bearing (2.2.2 (f) (i)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Wheel bearing has excessive play crushdrive bearing (5.1.3 (a) (i)) | 1 |
Central Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
Throttle operating incorrectly Revs up on full lock Off Side (6.2.7 (a) (i)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Horn control defective |1.7.2a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake lever insecure lock nut missing (1.1.2 (e) (i)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp light source and lamp not compatible H.I.D retro fitted (4.1.4 (c)) | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Centre Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Centre Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Horn not working (7.7 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies from rear application |1.3.1a| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Centre Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Front Brake disc significantly and obviously worn Brake disc fixing bobbins worn to excess. (1.1.14 (a) (i)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Outer Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Outer Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear All direction indicators obviously incorrectly positioned Incorporated into the tail light (4.4.3 (a)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Central Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Front Shock absorber has a serious fluid leak Fork oil seal failed |5.3.2 |b|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |