| Most common failures | No# failures |
|---|
| Registration plate issues | 74 |
| Headlamp aim out of alignment | 44 |
| Front wheel bearings have excessive free play |2.3.5b| | 42 |
| Front wheel bearings are excessively rough |2.3.5b| | 34 |
| Rear reflector on motorcycle missing |1.4.1| | 28 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
| Horn not working |1.7.3a| | 18 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 14 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 11 |
| Headlamp aim beam image kick up to the offside |1.6| | 9 |
| Riders seat insecure |6.2.1a| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
| Registration plate lamp issues | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 5 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
| Stop lamp emits other than a steady red light |1.3.1b| | 4 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Rear position lamp incorrect colour |1.1.2b| | 4 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Front position lamp incorrect colour |1.1.2a| | 3 |
| Headlamp incorrect colour |1.2.1| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Stop lamp does not emit a steady light |1.3.1b| | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Offside Front Brake disc|s| insecure |3.2.A1g| | 2 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Brake hose leaking fluid |3.2.B4| | 2 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Front Brake hose fouling |3.2.B3b| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| An item not tested |Manual| | 2 |