Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Registration plate issues | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front Upper Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Central Front Upper Fuel tank insecure (6.1.3 (a) (i)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Horn not working |1.7.3a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Headlamp aim beam image kick up to the offside masked |1.6| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Central Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Lower Brake component is excessively corroded |3.1.5| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
An item not tested |Manual| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake hose excessively deteriorated | 1 |