Most common failures | No# failures |
---|
Registration plate issues | 15 |
Headlamp aim out of alignment | 14 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |1.7.3a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake hose which buldges |3.2.B4| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Registration plate lamp issues | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake hose excessively deteriorated | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Steering lock stop ineffective Bottom yoke fouling headlamp bracket |2.1.3| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Horn missing |1.7.1| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Offside Rear Motorcycle structure cracked rear frame footrest/exhaust mount cracked |6.1.1a| | 1 |
Drive chain fouling another component center stand |6.2.1d| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Motorcycle structure cracked |6.1.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Centre Front Upper Front position lamp missing |1.1.1a| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Horn not working |1.7.3a| | 1 |