Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Registration plate lamp issues | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Direction indicator obviously incorrectly positioned Not spaced 240mm apart. (4.4.3 (a)) | 1 |
Nearside Front Brake component is excessively corroded |3.1.5| | 1 |
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Inner Horn is not a constant note |1.7.3c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Brake rod excessively damaged |3.2.A1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Inner Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |