Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Registration plate issues | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Brake component leaking fluid |3.2.B4| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Brake pedal has insufficient reserve travel rear brake (1.1.2 (a)) | 1 |
Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel system component leaking carb (6.1.3 (b) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride footrest |6.2.1h| | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Front Lower Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Lower Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Nearside Front Lower Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Lower Brake excessively binding (1.2.1 (f)) | 1 |
Horn not working |1.7.3a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
An item not tested |Manual| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |