Most common failures | No# failures |
---|
Headlamp aim out of alignment | 56 |
Registration plate lamp issues | 20 |
Drive chain excessively loose |6.2.1d| | 19 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Registration plate issues | 9 |
Horn not working |1.7.3a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front Brake excessively binding |1.2.1 |f|| | 4 |
Handlebar deformed |2.1.1b| | 4 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Front Stop lamp does not illuminate immediately a brake applies lever switch |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride drive chain link |6.2.1h| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicator obscured Both sides |1.5.1a| | 1 |
Central Front Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure main stand mounting bolts insecure (6.1.1 (b) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Chain guard insecure |6.1.7 |i|| | 1 |
Front Brake lagging in operation (1.2.1 (d)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Front Valve stem seriously damaged Rubber heavily deteriorated. (5.2.3 (j)) | 1 |
Front Brake component is excessively corroded Brakes Seized On and Binding |Unable to test wheel bearing| |3.1.5| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Footrest missing passenger footpegs missing at time of test |6.2.12 |a|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Lower Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Nearside Front Direction indicators not working 2/3 not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp indicators affect illumination of rear light. |1.1.3b| | 1 |
Stop lamp not working Rear brake control. (4.3.1 (a) (ii)) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Front Brake disc|s| insecure Rivets worn |3.2.A1g| | 1 |
Offside Front Brake disc|s| insecure Rivets worn |3.2.A1g| | 1 |
Fuel cap sealing washer deteriorated Tank filler seat corroded |7.2.2c| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Stop lamp not working control 2 (4.3.1 (a) (ii)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
All position lamps not working rear tail tight |4.2.1 |a|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Stop lamp not working Control 1 |front brake| |4.3.1 |a| |ii|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Horn not working lubricated unit and cleaned connections |7.7 |a| |ii|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lever cracked |3.1.2c| | 1 |
Rear suspension bearing has excessive free play Swingarm pivot |2.4.A2a|i|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Front Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Stop lamp not working foot (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Position lamp showing red light to the front (4.2.3 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Direction indicators flashing more than 120 times per minute all |1.5.1c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Nearside Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Offside Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Rear An item not tested |Manual| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
An item not tested |Manual| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Stop lamp not working FRONT BRAKE SWITCH DISCONNECTED (4.3.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Offside Rear Footrest insecure Clip missing |6.2.12 |a|| | 1 |
Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Exhaust excessively deteriorated centre section snapped |7.1.1a| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front An item not tested |Manual| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |